李四一拆了跑货机台的零件

文摘 2024-12-19 09:03 浙江

李四一正在赶往半导体厂的路上，一大早上厂里就来电话了，说是有一台机器down了，搞不起来，让李四一麻溜一点过来。李四一在路上连忙说来了来了。

他的脖子仿佛有一根无形的绳子，把自己拴着，如果离机台太远了，就会自动收紧，直到李四一和机台贴在一起，捆绑在一起。

李四一到机台边上一看，红色的大弹窗，起不来了。

李四一一看机台里面还有片子，便让客户自己准备工具把片子取走，等了半天，客户在慢慢悠悠地拿着工具和FOUP过来把片子取走。

李四一便开始进行诊断了，又是拆盖板，又是忙着开关电的，最后判断是有一块控制电路板有问题，李四一问客户说有没有多余的备件拿过来试试看，客户说要不然去拆一下3号机的，3号机这会儿是空闲的。

李四一说，你确定？别待会儿把3号机也搞挂了。客户说问下老板，老板让他们拆吧。

李四一从旁边那台机把那块电路板给拆了下来，又装到修的机台上，结果机台又报另外一个错了，李四一有种不妙的感觉，赶紧把这块电路板装回三号机去。装回去的时候，李四一把电一开，点起来初始化的按钮，结果3号机也报错了，客户怀疑是李四一拆的时候把电路板给搞坏了，李四一说别想冤枉我，是你们自己要我拆的，我都说了别把另外一台机也搞挂了，客户让李四一赶紧搞，别说了，先把3号机搞起来再说，还有两个小时3号就要跑货了。

李四一把接在这块电路板上面的线都给重新插拔了一下，总算是在他们要跑货之前给还机了，不然又得挨批斗了。

李四一继续检查看看是哪里有问题，导致机台起不来了，换了一块电路板也不太行，这时候李四一发现原来的电路板上有一根线接头的pin脚有些歪，他把那个pin脚用钳子维修了一下，重新接上线就好了。

正当李四一长叹一口气，终于可以撤退了的时候，客户打电话过来说3号机挂了，李四一走了过去一看，又是红色的弹窗，李四一心里麻麻的。让客户过来把wafer 拿走先。

搞了半天，还是没有修好得换零件了估计。李四一打电话给办公室的其他人让他们帮忙顶个零件过来。

李四一又和客户说了一下情况，说是需要定一个零件，得等上一两个小时，客户也没说什么了，有一台好起来了就行。

等零件到了，李四一飞速地换上，还机了，才长长地舒了一口气，客户让李四一再在fab待上一个小时，没报错就可以走了。李四一出了fab买了瓶饮料，坐在路边等了，一个小时以后，客户来电话说可以撤了，李四一拖着沉重的身子，回出租屋去了……

第二天领导去和客户开会的时候，听说他们领导还在背地里骂了李四一一顿，说干嘛拆他们跑货的正常机台的零件，脑子是不是有问题。李四一也很无奈，你们自己的人同意的呀！不过李四一也没在开会现场，挨骂的是领导，也就不在意了。领导安慰李四一说，正常正常，昨天的加班费记得填，我批准你多填两个小时。

李四一说我这个月已经超过36个小时了。

领导说填吧，没问题！

Li Siyi was on his way to the semiconductor factory when he received a call early in the morning from the factory, saying that a machine was down and could not be started, and asked Li Siyi to come quickly. Li Siyi hurriedly said on the way, "I'm coming." It seemed as if there was an invisible rope around his neck, tying him up. If he was too far away from the machine, it would automatically tighten until Li Siyi and the machine were stuck together and tied together. When Li Siyi got to the side of the machine, he saw a big red pop-up window, and it could not be started. Li Siyi saw that there were still films in the machine, so he asked the customer to prepare tools to take the films away. After waiting for a long time, the customer slowly came with tools and FOUP to take the films away. Li Siyi began to diagnose, removing the cover and turning the power on and off. Finally, he determined that there was a problem with a control circuit board. Li Siyi asked the customer if he had any spare parts to bring over and try. The customer said that he could dismantle machine No. 3, which was idle at the moment. Li Siyi said, "Are you sure? Don't let machine No. 3 crash later." The customer asked the boss to ask them to dismantle it. Li Siyi removed the circuit board from the machine next to him and installed it on the machine he was repairing. As a result, the machine reported another error. Li Siyi had a bad feeling and quickly installed the circuit board back to machine No. 3. When installing it back, Li Siyi turned on the power and pressed the initialization button. As a result, machine No. 3 also reported an error. The customer suspected that Li Siyi had damaged the circuit board when dismantling it. Li Siyi said, "Don't try to wrongly accuse me. You asked me to dismantle it. I told you not to break the other machine." The customer asked Li Siyi to hurry up and said, "Don't say anything. Get machine No. 3 up first. There are still two hours before the No. 3 machine is shipped." Li Siyi replugged all the wires connected to the circuit board and finally returned the machine before they were about to ship the goods. Otherwise, he would be criticized again. Li Siyi continued to check to see what was wrong, causing the machine to stop working. He changed the circuit board but it didn't work. At this time, Li Siyi found that the pin of a wire connector on the original circuit board was a little crooked. He repaired the pin with pliers and reconnected it. Just when Li Siyi sighed and finally could retreat, the customer called and said that machine No. 3 was broken. Li Siyi walked over and saw that there was another red pop-up window. Li Siyi felt uneasy. He asked the customer to come and take the wafer away first. After a long time, it still didn't fix it. I guess I had to replace the parts. Li Siyi called other people in the office and asked them to help bring the parts over. Li Siyi told the customer about the situation again, saying that he needed to order a part and had to wait for an hour or two. The customer didn't say anything, as long as one machine worked. When the part arrived, Li Siyi quickly replaced it and returned the machine. He breathed a sigh of relief. The customer asked Li Siyi to stay in the fab for another hour and leave if there were no errors. Li Siyi went out of the fab to buy a bottle of drink, and sat on the roadside waiting. An hour later, the customer called and said that he could leave. Li Siyi dragged his heavy body back to the rental house... The next day, when the leader went to a meeting with the customer, it was heard that their leader scolded Li Siyi behind his back, asking why he dismantled the parts of their normal machines for running goods, and whether he had a problem with his brain. Li Siyi was also helpless, your own people agreed! However, Li Siyi was not at the meeting, and it was the leader who was scolded, so he didn't care. The leader comforted Li Siyi and said, it's normal, remember to fill in yesterday's overtime pay, I approve you to fill in two more hours. Li Siyi said that I have exceeded 36 hours this month. The leader said to fill it in, no problem!