头痛医脚，李四一把机台软件问题当硬件修了

文摘 2025-01-11 09:28 陕西

本文纯属虚构，请勿当真！

你好，是设备值班吗？这边lAGgcf08号机down机了，麻烦过来看一下。

李四一正准备午休呢，就接到了制造部的电话，只能进去修了。李四一背上无尘背包，走进了无尘室。

李四一来到机台的电脑面前，看到红色的弹窗，他看看机台里面还有五片wafer,便决定先把wafer退出来，自从上次没退wafer，导致他们产品片损坏之后被制造部大喊打倒李四一之后，李四一每次都会先检查一下wafer状态了。

李四一把wafer退出来之后，便开始找问题了。

机台的弹窗显示有一个马达动不了了，李四一切到维修界面想单独动一动那个马达，马达像是焊在那里似的，纹丝不动，李四一用手去动也是不行，李四一便把马达的电源下了，他试了一下，能够动，还挺丝滑的。李四一又量了一下马达的输入电压，看着是正常的，难不成是控制电路板坏了。

李四一当即决定换一块试试，结果换了一块，还是一样，李四一又给换回了原来的。这时候制造部打电话过来催了，问什么时候能修好？

李四一说，正在修，估计得明天了，说罢就把电话挂了。领导又打电话过来问修的怎么样，李四一说，正在修正在修了。

李四一去仓库拿了一个马达过来，他先不装上去，想着测试一下动作行不行，李四一把线接好，便开始准备动马达，结果马达神奇地动了起来，李四一在仿佛之中听见了机台和李四一说了句，神医。

李四一费半天劲把旧的拆了下来，又把新的装了上去，当点开初始化按键的时候，一个红色的弹窗又冒了出来，这是又异体排斥吗。

李四一拿旧的在外面接上线试了一下动不了，要么就是装上去烧坏了？

李四一满头大汗，额头上的汗珠开始往寒假地板上滴，滴在了地板上的孔上，滴在了李四一的无尘服上。

李四一又把刚刚装上去的马达的拆了下来测试一下，还是动不了，还有一丝丝糊味。李四一感觉不对劲，去电脑的马达配置文件夹里面看，对比了其他几台的内容，少了一个文件。

李四一通过FTP把文件从其他台导入到了这台，但是由于这两个马达都没用了，李四一只能去仓库再取一个，经过前两次的拆装，李四一装第三个的时候已经更加熟练了，换完果然就好了。李四一把机台交还给了厂姐厂哥。

谁这么缺德把文件夹里面的这个文件给删了，李四一出去的时候天也已经黑了，李四一还得写一写报告说明一下为什么修了这么久，还有分析下机台坏的原因。

李四一坐在工位面前泡了包泡面就开始写了，李四一吃着香喷喷的泡面享受着惬意的短暂休息时光～

Hello, is this the equipment duty officer? Machine lAGgcf08 is down here, please come and check it out. Li Siyi was just about to take a lunch break when he received a call from the manufacturing department and had to go in to repair it. Li Siyi put on his dust-free backpack and walked into the clean room. Li Siyi came to the computer of the machine and saw a red pop-up window. He looked at the five wafers in the machine and decided to take them out first. Since he didn't take out the wafers last time, which caused their product to be damaged and the manufacturing department shouted to beat Li Siyi, Li Siyi would check the status of the wafers first every time. After Li Siyi took out the wafer, he started to find the problem. The pop-up window of the machine showed that a motor could not move. Li Siyi went to the maintenance interface and wanted to move the motor alone. The motor seemed to be welded there and did not move at all. Li Siyi tried to move it by hand but it didn't work. Li Siyi turned off the power of the motor. He tried it and it moved smoothly. Li Siyi measured the input voltage of the motor again, and it looked normal. Could it be that the control circuit board was broken? Li Siyi immediately decided to try another one, but it was still the same after changing it, so Li Siyi changed it back to the original one. At this time, the manufacturing department called to urge him, asking when it could be repaired? Li Siyi said that it was being repaired and it would probably be repaired tomorrow, and then hung up the phone. The leader called again to ask how the repair was going, and Li Siyi said that it was being repaired. Li Siyi went to the warehouse to get a motor, but he didn't install it first, thinking about testing whether it would work. Li Siyi connected the wires and started to move the motor. As a result, the motor magically moved, and Li Siyi seemed to hear the machine and Li Siyi say, "Wonderful doctor." Li Siyi took a long time to dismantle the old one and installed the new one. When he clicked the initialization button, a red pop-up window popped up again. Is this foreign body rejection again? Li Siyi took the old one and connected the wires outside to try it, but it didn't move. Or was it burned out after being installed? Li Siyi was sweating profusely, and the sweat on his forehead began to drip onto the floor, onto the hole on the floor, and onto Li Siyi's dust-free suit. Li Siyi took down the motor he had just installed and tested it, but it still wouldn't move, and there was a slight smell of burnt food. Li Siyi felt something was wrong, so he went to the motor configuration folder on the computer and compared the contents of the other machines. He found that a file was missing. Li Siyi imported the files from the other machines to this one via FTP, but since the two motors were useless, Li Siyi could only go to the warehouse to get another one. After the first two disassembly and assembly, Li Siyi was more skilled when he installed the third one, and it worked after the replacement. Li Siyi returned the machine to the factory sister and brother. Who was so wicked to delete the file in the folder? It was already dark when Li Siyi went out. Li Siyi had to write a report to explain why the repair took so long, and analyze the reasons for the machine's failure. Li Siyi sat in front of his workstation, made a pack of instant noodles and started writing. Li Siyi ate the fragrant instant noodles and enjoyed a pleasant short break~