【《钢铁》创刊70周年】《钢铁》副主编康永林文章汇编（上）

文章组成

（按照发表时间由远及近）

1. W9Mo3Cr4V高速钢的碳化物分布与变形工艺

引用本文：

董德元, 康永林, 苏敏文, 游伯诚, 吕上乐, 唐荣德, 赵忠武. W9Mo3Cr4V高速钢的碳化物分布与变形工艺[J]. 钢铁, 1988,23 (5): 25.

DONG Deyuan, KANG Yonglin, SU Minwen, YOU Bocheng, LÜ Shangle, TANG Rongde, ZHAO Zhongwu. Forging factors and carbides distribution of HIGH-SPEED steel W9Mo3Cr4V[J]. Iron and Steel, 1988, 23(5): 25.

下载网址：

2. 轧制方坯的三维弹塑性有限元研究

引用本文：

王艳文,康永林,余智勇,袁大焕,陈跃南,王国富. 轧制方坯的三维弹塑性有限元研究[J]. 钢铁, 2000, 35(2): 40-42.

WANG Yanwen, KANG Yonglin, YU Zhiyong, YUAN Dahuan, CHEN Yuenan, WANG Guofu. Three dimensional fem simulation of square billet rolling in box roll profile[J]. Iron and Steel, 2000,35 (2): 40-42.

下载网址：

3.不锈钢薄板基本成形性能与平整量关系的研究

引用本文：

雷君相,康永林,张鹏,任建新,李旭初. 不锈钢薄板基本成形性能与平整量关系的研究[J]. 钢铁, 2000, 35(6): 41-44.

LEI Junxiang, KANG Yonglin, ZHANG Peng, REN Jianxin, LI Xuchu. Investigation of relation between basic forming properties and flattening magnitude of stainless steel sheet[J]. Iron and Steel, 2000, 35(6): 41-44.

下载网址：

4. 薄板坯连铸连轧CSP生产低碳钢板的组织特征

引用本文：

康永林,柳得橹,傅杰,李晶,于浩,王元立,王中丙,李烈军. 薄板坯连铸连轧CSP生产低碳钢板的组织特征[J]. 钢铁, 2001, 36(6): 40-43.

KANG Yonglin, LIU Delu, FU Jie, LI Jing, YU Hao, WANG Yuanli, WANG Zhongbing, LI Liejun. Microstructural characteristics of low carbon steel strip produced by CSP technology[J]. Iron and Steel, 2001, 36(6): 40-43.

下载网址：

5.薄板坯连铸连轧CSP线生产低碳钢板的力学性能特征

引用本文：

王中丙,李烈军,康永林,柳得橹,傅杰. 薄板坯连铸连轧CSP线生产低碳钢板的力学性能特征[J]. 钢铁, 2001,36 (10): 33.

WANG Zhongbing, LI Liejun, KANG Yonglin, LIU Delu, FU Jie. Mechanical characteristics of low carbon steel sheets produced on CSP line[J]. Iron and Steel, 2001,36 (10): 33.

下载网址：

6.高强度薄钢板研究的新进展及其在汽车上的应用

引用本文：

康永林,孙建林. 高强度薄钢板研究的新进展及其在汽车上的应用[J]. 钢铁, 2002, 37(5): 65.

KANG Yonglin, SUN Jianlin. Development of high strength steel sheets and their application to automobile industry[J]. Iron and Steel, 2002,37 (5): 65.

下载网址：

7. CSP连轧过程中低碳钢的组织变化规律

引用本文：

霍向东,柳得橹,陈南京,康永林,傅杰,周德光,王中丙,李烈军,梁健宝. CSP连轧过程中低碳钢的组织变化规律[J]. 钢铁, 2002,37 (7): 45-49.

HUO Xiangdong, LIU Delu, CHEN Nanjing, KANG Yonglin, FU Jie, ZHOU Deguang, WANG Zhongbing, LI Liejun, LIANG Jianbao. Study on microstructure evolution of low carbon steel during continuous rolling in CSP[J]. Iron and Steel, 2002, 37(7): 45-49.

下载网址：

8. 连轧大规格合金芯棒钢三维热力耦合模拟仿真

引用本文：

洪慧平,康永林,冯长桃,陈溪强,韩畴. 连轧大规格合金芯棒钢三维热力耦合模拟仿真[J]. 钢铁, 2002, 37(10): 23.

HONG Huiping, KANG Yonglin, FENG Changtao, CHEN Xiqiang, HAN Chou. 3d thermo-mechanical coupled simulation for continuous rolling of large alloy steel round bar[J]. Iron and Steel, 2002, 37(10): 23.

下载网址：

9. CSP线热轧薄板的组织演变及微观取向研究

引用本文：

于浩,康永林,傅杰,柳得橹,王中丙,李烈军,范胜标,陈贵江,李柯新. CSP线热轧薄板的组织演变及微观取向研究[J]. 钢铁, 2002, 37(10): 38-42.

YU Hao, KANG Yonglin, FU Jie, LIU Delu, WANG Zhongbing, LI Liejun, FAN Shengbiao, CHEN Guijiang, LI Kexin. Microstructure evolution and texture of CSP hot rolled strip[J]. Iron and Steel, 2002, 37(10): 38-42.

下载网址：

10. CSP薄板坯的铸态组织特征研究

引用本文：

周德光,傅杰,金勇, 柳得橹,康永林,王中丙,陈贵江,李烈军. CSP薄板坯的铸态组织特征研究[J]. 钢铁, 2003, 38(8): 47-50.

ZHOU Deguang, FU Jie, JIN Yong, LIU Delu, KANG Yonglin，WANG Zhongbing, CHEN Guijiang，LI Liejun. Study on characteristics of as cast structure of CSP slab[J]. Iron and Steel,2003,38 (8): 47-50.

下载网址:

11. CSP低碳钢薄板组织演变及强化机理研究

引用本文：

康永林,于浩,王克鲁, 傅杰,柳得橹,王中丙,毛新平,陈贵江. CSP低碳钢薄板组织演变及强化机理研究[J]. 钢铁, 2003, 38(8): 20-26.

KANG Yonglin, YU Hao, WANG Kelu, FU Jie, LIU Delu, WANG Zhongbing, MAO Xinping, CHEN Guijiang. Study of microstructure evolution and strengthening mechanism of low carbon steel produced by CSP line[J]. Iron and Steel, 2003, 38 (8): 20-26.

下载网址:

12. Cu对CSP工艺热轧薄板质量的影响

引用本文：

邵伟然,柳得橹,王元立, 陈南京,傅杰,康永林,王中丙,李烈军,陈贵江. Cu对CSP工艺热轧薄板质量的影响[J]. 钢铁, 2003,38 (8): 43-46.

SHAO Weiran, LIU Delu, WANG Yuanli, CHEN Nanjing, FU Jie, KANG Yonglin, WANG Zhongbing, LI Liejun, CHEN Guijiang. Influence of copper on quality of hot strip produced by csp process[J]. Iron and Steel, 2003,38 (8): 43-46.

下载网址:

13. CSP热轧过程温度场模拟

引用本文：

唐广波, 刘正东, 董瀚, 王中丙,陈顺安,孙文填,张若生,谢立群,黄志勇,康永林. CSP热轧过程温度场模拟[J]. 钢铁, 2003, 38(8): 38-42.

Tang Guangbo, Liu Zhengdong, Dong Han, WANG Zhongbing，CHEN Shunan，SUN Wentian，ZHANG Ruosheng，XIE Liqun，HUANG Zhiyong，KANG Yonglin. Thermal simulation of CSP hot rolling[J]. Iron and Steel, 2003, 38(8): 38-42.

下载网址:

14. CSP层流冷却工艺对低碳钢组织和性能的影响

引用本文：

霍向东,柳得橹,孙贤文, 康永林,傅杰,王中丙,李烈军,陈贵江. CSP层流冷却工艺对低碳钢组织和性能的影响[J]. 钢铁, 2003,38 (8): 30-34.

HUO Xiangdong, LIU Delu, SUN Xianwen, KANG Yonglin, FU Jie, WANG Zhongbing, LI Liejun, CHEN Guijiang. Effects of laminar flow cooling on microstructure and mechanical properties of low carbon steel strip produced by CSP technology[J]. Iron and Steel,2003,38 (8): 30-34.

下载网址:

15. 不锈钢冷轧卷连续酸洗工艺参数的正交试验研究

引用本文：

雷君相,康永林,宋仁伯, 杨雄飞,王志军. 不锈钢冷轧卷连续酸洗工艺参数的正交试验研究[J]. 钢铁, 2005, 40(1): 51-54.

LEI Junxiang, KANG Yonglin, SONG Renbo, YANG Xiongfei, WANG Zhijun. Orthogonal test research of continuous pickling process parameters on stainless steel cold rolling coil[J]. Iron and Steel, 2005, 40(1): 51-54.

下载网址:

16. 电炉CSP流程低碳高强汽车大梁钢的开发

引用本文：

毛新平,王中丙,林振源,许传棻,康永林,傅杰. 电炉CSP流程低碳高强汽车大梁钢的开发[J]. 钢铁, 2005, 40(2): 37-40.

MAO Xinping, WANG Zhongbing, LIN Zhenyuan, XU Chuanfen, KANG Yonglin, FU Jie. Development of low carbon high strength automobile beam steel for electric furnace CSP process[J]. Iron and Steel, 2005, 40(2): 37-40.

下载网址:

17. 薄板坯连铸连轧钢的组织性能综合控制理论及应用

引用本文：

康永林,傅杰,毛新平. 薄板坯连铸连轧钢的组织性能综合控制理论及应用[J]. 钢铁, 2005, 40(7): 41-45.

KANG Yonglin, FU Jie, MAO Xinping. Comprehensive control theory on microstructure and properties of steel products of thin slab casting and rolling and its application[J]. Iron and Steel, 2005, 40(7): 41-45.

下载网址:

18. 微合金高强度耐候钢的试验研究

引用本文：

陈庆军,康永林,苏世怀,张建平,骆小刚. 微合金高强度耐候钢的试验研究[J]. 钢铁, 2005, 40(7): 60-63.

CHEN Qingjun, KANG Yonglin, SU Shihuai, ZHANG Jianping, LUO Xiaogang. Experimental study on microalloyed high strength weathering steel[J]. Iron and Steel, 2005, 40(7): 60-63.

下载网址:

19. CSP工艺生产的低碳钢中纳米尺寸硫化物

引用本文：

霍向东,柳得橹,王元立,柏明卓,康永林. CSP工艺生产的低碳钢中纳米尺寸硫化物[J]. 钢铁, 2005, 40(8): 60-64.

HUO Xiangdong, LIU Delu, WANG Yuanli, BAI Mingzhuo, KANG Yonglin. Nanometer sulfides in low carbon steel produced by CSP process[J]. Iron and Steel, 2005, 40(8): 60-64.

下载网址:

20. EAF-CSP流程钛微合金化高强钢板的组织和性能研究

引用本文：

毛新平,孙新军,康永林,林振源,周健. EAF-CSP流程钛微合金化高强钢板的组织和性能研究[J]. 钢铁, 2005,40 (9): 68.

MAO Xinping, SUN Xinjun, KANG Yonglin, LIN Zhenyuan, ZHOU Jian. Microstructure and properties of titanium microalloyed high strength strip produced by EAF-CSP[J]. Iron and Steel, 2005,40 (9): 68.

下载网址:

21.电炉CSP流程微Ti低碳高强汽车用钢板的开发研究

引用本文：

赵征志,康永林,于浩,毛新平,陈贵江. 电炉CSP流程微Ti低碳高强汽车用钢板的开发研究[J]. 钢铁, 2005, 40(10): 75-78.

ZHAO Zhengzhi, KANG Yonglin, YU Hao, MAO Xinping, CHEN Guijiang. Development of Ti-microalloyed low carbon steel for automobile frames by EAF-CSP process[J]. Iron and Steel, 2005, 40 (10): 75-78.

下载网址:

22. 20辊冷轧硅钢凸度道次遗传系数的试验研究

引用本文：

张凤泉,刘本仁,康永林,刘广益,吴国荣. 20辊冷轧硅钢凸度道次遗传系数的试验研究[J]. 钢铁, 2005, 40(11): 40-45.

ZHANG Fengquan, LIU Benren, KANG Yonglin, LIU Guangyi, WU Guorong. Study on pass genetic factor of crown of non-oriented silicon steel strip rolled on 20-high sendzimir cold-rolling mill[J]. Iron and Steel, 2005, 40 (11): 40-45.

下载网址:

23. X65管线钢的模拟炉卷轧制工艺研究与组织性能

引用本文：

江海涛,康永林,梁正伟. X65管线钢的模拟炉卷轧制工艺研究与组织性能[J]. 钢铁, 2006, 41(4): 51-55.

JIANG Haitao, KANG Yonglin, LIANG Zhengwei. Structure and Properties of Simulation Rolled X65 Pipeline Steel on Steckel Mill[J]. Iron and Steel, 2006, 41(4): 51-55.

下载网址:

24. 热轧带钢传热模拟及变形区换热系数的确定

引用本文：

唐广波,刘正东,康永林,王巍,张丕军. 热轧带钢传热模拟及变形区换热系数的确定[J]. 钢铁, 2006, 41(5): 36-40.

TANG Guangbo，LIU Zhengdong，KANG Yonglin，WANG Wei，ZHANG Pijun. Simulation of Thermal Evolution of Strip and Determination of Heat Transfer Coefficient in Deformation Zone During Hot Rolling[J]. Iron and Steel, 2006, 41(5): 36-40.

下载网址:

25. FTSR线铁素体轧制低碳钢板的组织性能分析

引用本文：

王欣,康永林,于浩,陈礼斌,孔庆福. FTSR线铁素体轧制低碳钢板的组织性能分析[J]. 钢铁, 2006, 41(6): 56-58.

WANG Xin, KANG Yonglin, YU Hao, CHEN Libin, KONG Qingfu. Microstructure and properties of low carbon steel strip produced by ferrite rolling technology on FTSR line[J]. Iron and Steel, 2006, 41(6): 56-58.

下载网址:

26. 用炉卷轧机生产的X65管线钢板的研制与开发

引用本文：

江海涛,康永林,黄一新,谯明亮,尹雨群. 用炉卷轧机生产的X65管线钢板的研制与开发[J].钢铁, 2006, 41(10): 59-63.

JIANG Haitao, KANG Yonglin, HUANG Yixin, QIAO Mingliang, YIN Yuqun. Research and Development of X65 Pipeline Steel Plate Produced by Steckel Mill[J]. Iron and Steel, 2006, 41(10): 59-63.

下载网址:

27. 高强深冲冷轧170P1板的试验研究

引用本文：

尹显东,康永林,蒋奇武,刘仁东,孙大庆. 高强深冲冷轧170P1板的试验研究[J]. 钢铁, 2006, 41(10): 46.

YIN Xiandong, KANG Yonglin, JIANG Qiwu, LIU Rendong, SUN Daqing. Study on High Strength Deep Drawing Cold Rolled Steel Sheets 170P1[J]. Iron and Steel, 2006, 41(10): 46.

下载网址:

28. 20MnSi棒材轧后分级控冷过程组织性能预测

引用本文：

程满,洪慧平,韩文,康永林,金永春. 20MnSi棒材轧后分级控冷过程组织性能预测[J]. 钢铁, 2007, 42(1): 50-54.

CHENG Man, HONG Huiping, HAN Wen, KANG Yonglin, JIN Yongchun. Microstructure and Properties Prediction for MultiStage Controlled Cooled 20MnSi Steel Bar[J]. Iron and Steel, 2007, 42(1): 50-54.

下载网址:

29. TRIP钢热变形后冷却工艺的优化

引用本文：

张迎晖,赵鸿金,康永林. TRIP钢热变形后冷却工艺的优化[J].钢铁, 2007, 42(3): 52-55.

ZHANG Yinghui, ZHAO Hongjin, KANG Yonglin. Research on Optimization of Cooling Process for TRIP Steel After Hot Deformation[J]. Iron and Steel, 2007, 42(3): 52-55.

下载网址:

https://kns.cnki.net/kcms2/article/abstract?v=v-1aSqfKcSW8hwMKpxEOWeao2LqPNvV9YHyz4ILBJzW0r4L0ud59sVW0O0fycUuG98s2j7Z0ydaIjCbvVnBte8F1gxTd7DIpudtBXodoGZ_51MmIHmns_EqNR_WquQYVY3UWc0ifJ5cyHhng0pCvrAxU0F763Jgs3kx8d-L81Ty1VepUnKGvrCROWQ21hSdJ&uniplatform=NZKPT&language=CHS