【《钢铁》创刊70周年】《钢铁》副主编康永林文章汇编（下）

文章组成

（按照发表时间由远及近）

30. 卷取温度、冷轧总变形量对含硼08Al钢力学性能的影响

引用本文：

康永林,景钦广,吴光亮,温德智,周春泉. 卷取温度、冷轧总变形量对含硼08Al钢力学性能的影响[J]. 钢铁, 2007, 42(4): 67.

KANG Yonglin, JING Qinguang, WU Guangliang, WEN Dezhi, ZHOU Chunquan. Influence of coiling temperature and total cold rolling reduction rate on mechanical properties of BC on taining 08Al steel[J]. Iron and Steel, 2007, 42(4): 67.

下载网址:

31 应用RBF神经网络预测冷连轧机轧制力

引用本文：

张俊明,刘军,康永林,杨荃. 应用RBF神经网络预测冷连轧机轧制力[J]. 钢铁, 2007, 42(8): 46-48.

ZHANG Junming, LIU Jun, KANG Yonglin, YANG Quan. Application of RBF Neural networks to prediction of rolling force of tandem cold mill[J]. Iron and Steel, 2007, 42(8): 46-48.

下载网址:

32. 冷轧双相钢连续退火组织的转变

引用本文：

邝霜,康永林,于浩,刘仁东,严玲. 冷轧双相钢连续退火组织的转变[J]. 钢铁, 2007, 42(11): 65.

KUANG Shuang, KANG Yonglin, YU Hao, LIU Rendong, YAN Ling. Experimental Study on microstructure evolution in continuous annealing of cold rolled dual phase steels[J]. Iron and Steel, 2007, 42(11): 65.

下载网址:

33. 回火对C-Si-Mn系双相钢组织与性能的影响

引用本文：

邝霜,康永林,于浩,刘仁东,严玲. 回火对C-Si-Mn系双相钢组织与性能的影响[J]. 钢铁, 2008, 43(3): 77-80.

KUANG Shuang，KANG Yonglin， YU Hao，LIU Ren Dong，YAN Ling. Influence of Tempering on Microstructure and Mechanical Property of Dual Phase Steel of C-Si-Mn Alloy System[J]. Iron and Steel, 2008, 43(3): 77-80.

下载网址:

34. 弹性辊轧制过程的有限元仿真分析

引用本文：

赵培林,朱国明,马光亭,汤化胜,孙会朝,康永林. 弹性辊轧制过程的有限元仿真分析[J]. 钢铁, 2008, 43(6): 47.

ZHAO Peilin，ZHU Guoming，MA Guangting，TANG Huasheng，SUN Huizhao，KANG YongLin. Finite element analysis of rolling process with elastic roller[J]. Iron and Steel, 2008, 43(6): 47.

下载网址:

35. 汽车轻量化先进高强钢与节能减排

引用本文：

康永林. 汽车轻量化先进高强钢与节能减排[J]. 钢铁, 2008, 43(6): 1-7.

KANG Yonglin. Lightweight vehicle, advanced high strength steel and energy saving and emission reduction[J]. Iron and Steel, 2008, 43(6): 1-7.

下载网址:

36. 0Cr18Ni9不锈钢冷轧卷碱洗工艺参数的正交试验

引用本文：

雷君相,康永林,宋仁伯,杨雄飞,王志军. 0Cr18Ni9不锈钢冷轧卷碱洗工艺参数的正交试验[J]. 钢铁, 2008, 43(12): 58-62.

LEI Junxiang，KANG Yonglin，SONG Renbo，YANG Xiongfei，WANG Zhijun. Orthogonal test of alkaline cleaning process parameters of 0cr18ni9 stainless steel cold rolled coil[J]. Iron and Steel, 2008, 43(12): 58-62.

下载网址:

37. 新一代汽车用先进高强钢的成形与应用

引用本文：

康永林,陈贵江,朱国明,宋仁伯. 新一代汽车用先进高强钢的成形与应用[J]. 钢铁, 2010, 45(8): 1.

KANG Yonglin, CHEN Guijiang, ZHU Guoming, SONG Renbo. Forming technology and application of new generation advanced high strength steel for automobile[J]. Iron and Steel, 2010, 45(8): 1.

下载网址:

38. 中国轧钢近年来的技术进步

引用本文：

翁宇庆,康永林. 中国轧钢近年来的技术进步[J]. 钢铁, 2010, 45(9): 1.

WENG Yuqing，KANG Yonglin. Recent progress in steel rolling technology in china[J]. Iron and Steel, 2010, 45(9): 1.

下载网址:

39. 钢帘线用LX70盘条的研制

引用本文：

曹树卫,康永林,王新江. 钢帘线用LX70盘条的研制[J]. 钢铁, 2011, 46(9): 74.

CAO Shuwei, KANG Yonglin, WANG Xinjiang. Development of LX70 wire rod for steel cord[J]. Iron and Steel, 2011, 46(9): 74.

下载网址:

40. 半无头轧制薄规格带钢的组织性能与板形

引用本文：

康永林, 周明伟, 刘旭辉, 陈林恒，凌华, 吴浩鸿. 半无头轧制薄规格带钢的组织性能与板形[J]. 钢铁, 2012, 47(1): 44-50.

KANG Yong-lin, ZHOU Ming-wei, LIU Xu-hui, CHEN Lin-heng, LING Hua, WU Hao-hong. Microstructure-properties and profile of thin strip by semi-endless rolling[J]. Iron and Steel, 2012, 47(1): 44-50.

下载网址:

https://kns.cnki.net/kcms2/article/abstract?v=v-1aSqfKcSXbb-venN9MS1UTljzpFqHZySObnjwDi4zpsfHonQFOT-uW4uO-c8EMaDVT9Wo9WMrQ5GDjF0QFVD1iYOoKRUwy0Xv4lRNxVaSeDVUvI_Iun3yq4u-dsYwz5C8PLbiluwk_px3TpZI8Kd-BSmpPpU00tMGD_ytX6SL8T2-aZBWmKUy0lqhyttcv&uniplatform=NZKPT&language=CHS

41. 热轧板带无头轧制技术

引用本文：

康永林,朱国明. 热轧板带无头轧制技术[J]. 钢铁, 2012, 47(2): 1-6.

KANG Yonglin, ZHU Guoming. Hot strip endless rolling technology[J]. Iron and Steel, 2012, 47(2): 1-6.

下载网址:

42. 二辊斜轧延伸大口径P92厚壁管分层缺陷倾向性研究

引用本文：

尹元德, 李胜祗, 康永林, 王鹏展, 王向东, 李国涛. 二辊斜轧延伸大口径P92厚壁管分层缺陷倾向性研究[J]. 钢铁, 2012, 47(10): 52-56.

YIN Yuande，LI Shengzhi，KANG Yonglin，WANG Pengzhan，WANG Xiangdong，LI Guotao. Tendency of lamination defect of thick walled P92 pipe with large diameter elongated by roll rotary rolling process[J]. Iron and Steel, 2012, 47(10): 52-56.

下载网址:

43. 四线切分控轧控冷装备设计及工艺

引用本文：

邸全康, 王全礼, 康永林, 郑福印, 周玉丽, 程四华. 四线切分控轧控冷装备设计及工艺[J]. 钢铁, 2013, 48(2): 34.

DI Quankang, WANG Quanli, KANG Yonglin, ZHENG Fuyin, ZHOU Yuli, CHENG Sihua. Design of controlled rolling and cooling equipment of four-strands splitting bar and research of production process[J]. Iron and Steel, 2013, 48(2):34.

下载网址:

44. 热浸镀锌铝镁镀层微观组织试验

引用本文：

吕家舜,李锋,杨洪刚,康永林. 热浸镀锌铝镁镀层微观组织试验[J]. 钢铁, 2013, 48(6): 75-79.

LÜ Jiashun, LI Feng, YANG Honggang, KANG Yonglin. Experiments investigation on microstructure of galvanized Zn-Al-Mg coated steel sheet[J]. Iron and Steel, 2013, 48(6): 75-79.

下载网址:

45. CSP线生产薄规格超高强带钢的轧制工艺与组织性能

引用本文：

陈良,张超,朱帅,康永林. CSP线生产薄规格超高强带钢的轧制工艺与组织性能[J]. 钢铁, 2014, 49(1): 57-61.

CHEN Liang, ZHANG Chao,ZHU Shuai ,KANG Yonglin. Rolling process and microstructure and properties of thin gauge ultra-high strength strip manufactured by CSP line[J]. Iron and Steel, 2014, 49(1): 57-61.

下载网址:

46. H型钢万能轧制过程水平辊温度场研究

引用本文：

裴暖暖,朱国明,张思勋,袁鹏举,康永林. H型钢万能轧制过程水平辊温度场研究[J]. 钢铁, 2014, 49(4): 58-62.

PEI Nuannuan, ZHU Guoming, ZHANG Sixun, YUAN Pengju, KANG Yonglin. Temperature Field Research of Horizontal Roller for Universal Rolling Process of H-Beam[J]. Iron and Steel, 2014, 49(4): 58-62.

下载网址:

47. 淬火-贝氏体区配分工艺及钢的组织性能

引用本文：

朱帅,康永林,邝霜,姜英花. 淬火-贝氏体区配分工艺及钢的组织性能[J]. 钢铁, 2014, 49(6): 69-73.

ZHU Shuai, KANG YongLin, KUANG Shuang, JIANG YingHua. Microstructure Properties of Steel After Quenching and Partitioning in Bainite Zone[J]. Iron and Steel, 2014, 49(6): 69-73.

下载网址:

48. 在线余热淬火对U75V钢轨组织性能的影响

引用本文：

李波,朱国明,陶功明,康永林. 在线余热淬火对U75V钢轨组织性能的影响[J]. 钢铁, 2014, 49(7): 101.

LI Bo, ZHU Guoming, TAO Gongming, KANG Yonglin. Effect of online slacking-quench on the microstructure and properties of U75V rail[J]. Iron and Steel, 2014, 49(7): 101.

下载网址:

49. 锰含量和终轧温度对低成本中钛Q345B钢组织性能的影响

引用本文：

杨财水,罗许,李俊洪,康永林. 锰含量和终轧温度对低成本中钛Q345B钢组织性能的影响[J]. 钢铁, 2014, 49(11): 59-63.

YANG Caishui, LUO Xu, LI Junhong, KANG Yonglin. Effects of manganese content and finishing rolling temperature on the microstructure and mechanical properties of low cost middle titanium Q345B steel[J]. Iron and Steel, 2014, 49(11): 59-63.

下载网址:

50. 中国汽车发展趋势及汽车用钢面临的机遇与挑战

引用本文：

康永林,朱国明. 中国汽车发展趋势及汽车用钢面临的机遇与挑战[J]. 钢铁, 2014, 49(12): 1-7.

KANG Yonglin, ZHU Guoming. Development trend of china’s automobile industry and the opportunities and challenges of steels for automobiles[J]. Iron and Steel, 2014, 49(12): 1-7.

下载网址:

51. 高精度型钢轧制数字化技术及应用

引用本文：

康永林,朱国明,陶功明,张思勋. 高精度型钢轧制数字化技术及应用[J]. 钢铁, 2017, 52(3): 49-57.

KANG Yonglin, ZHU Guoming, TAO Gongming, ZHANG Sixun. Digital technology and application of high precision section steel rolling[J]. Iron and Steel, 2017, 52(3): 49-57.

下载网址:

52. 常规热连轧线Ti-IF钢铁素体轧制工艺研究与应用

引用本文：

王建功,赵虎,夏银锋,周旬,康永林,邱晨阳. 常规热连轧线Ti-IF钢铁素体轧制工艺研究与应用[J]. 钢铁, 2017, 52(10): 65-71.

WANG Jiangong, ZHAO Hu, XIA Yinfeng, ZHOU Xun, KANG Yonglin, QIU Chenyang. Development and application of ferrite rolling to Ti-IF steel in hot continuous rolling line[J]. Iron and Steel, 2017, 52(10): 65-71.

下载网址:

53 热宽带钢无头轧制技术进展及趋势

引用本文：

康永林,田鹏,朱国明. 热宽带钢无头轧制技术进展及趋势[J]. 钢铁, 2019, 54(3): 1-8.

KANG Yonglin, TIAN Peng, ZHU Guoming. Progress and trend on hot wide strip endless rolling technology[J]. Iron and Steel, 2019, 54(3): 1-8.

下载网址:

54. “十三五”中国轧钢技术进步及展望

引用本文：

康永林. “十三五”中国轧钢技术进步及展望[J]. 钢铁, 2021, 56(10): 1-15.

KANG Yonglin. China steel rolling technology progress in the 13th five-year plan and prospection[J]. Iron and Steel, 2021, 56(10): 1-15.

下载网址:

55. 板坯连铸大辊径大压下及低压缩比轧制特厚板

引用本文：

康永林,朱国明,姜敏,王国连,刘彭涛,徐海卫,谢翠红,魏运飞,沈开照,刘洋. 板坯连铸大辊径大压下及低压缩比轧制特厚板[J]. 钢铁, 2022,57 (7): 95-105.

KANG Yonglin, ZHU Guoming, JIANG Min, WANG Guolian, LIU Pengtao, XU Haiwei, XIE Cuihong, WEI Yunfei, SHEN Kaizhao, LIU Yang. Slab continuous casting by big roll heavy reduction and extra thick plate rolled by low compression ratio[J]. Iron and Steel, 2022, 57(7): 95-105.

下载网址:

56. 中国薄宽带钢无头轧制技术最新进展

引用本文：

康永林,朱国明,陈贵江,秦哲. 中国薄宽带钢无头轧制技术最新进展[J]. 钢铁, 2023, 58(7): 1-8.

KANG Yonglin, ZHU Guoming, CHEN Guijiang, QIN Zhe. Latest development of wide thin strip endless rolling technology in China[J]. Iron and Steel, 2023, 58(7): 1-8.

下载网址:

57. 板坯连铸大辊径铸轧辊不同冷却方式模拟

引用本文：

刘洋,王卫华,李新,谢翠红,马长文,张虎成,康永林. 板坯连铸大辊径铸轧辊不同冷却方式模拟[J]. 钢铁, 2024, 59(7): 75-82.

LIU Yang, WANG Weihua, LI Xin, XIE Cuihong, MA Changwen, ZHANG Hucheng, KANG Yonglin. Simulation on different cooling methods of large roll diameter casting rolls in slab continuous casting[J]. Iron and Steel, 2024, 59(7): 75-82.

下载网址: