Frequently Asked Questions
Q: Where can I find specification detail on the Niagara Edge 10?
A: You can find the data sheet and other collateral posted in the Resource Library on tridium.com.
Technical documentation, including dimensions, agency listings, IO mixture, input and output power
specification, environmental specifications and more, is posted on the Niagara Community website.
问: 在哪里可以找到关于 Niagara Edge 10 的规格细节？
答: 您可以在 tridium.com 的资源库中找到所发布的产品手册和其它相关资料。在 Niagara Community
网站的技术文件，包括尺寸、代理清单、IO、输入和输出功率规格，环境规格等。
Q: How many points of IO does the Niagara Edge 10 have?
A: The Niagara Edge 10 has 10 points of IO. Specifically, 5 universal inputs, 3 digital outputs and 2 analog
outputs. See the data sheet posted in the Resource Library on tridium.com for more detail.
问: Niagara Edge 10 有多少个 IO 点？
答: Niagara Edge 10 有 10 个 IO。具体地说, 5 个通用输入、3 个数字输出和 2 个模拟输出。有关详细信
息，请参阅 tridium.com 发布的产品手册。
Q: Does the Niagara Edge 10 support 20Hz pulse inputs?
A: No, the Niagara Edge 10 does not support 20Hz pulse inputs. See the data sheet posted in the
Resource Library on tridium.com for more detail on the universal inputs available.
问: Niagara Edge 10 支持 20Hz 脉冲输入吗？
答: 不支持，Niagara Edge 10 不支持 20Hz 脉冲输入。有关可用的通用输入的详细信息，请参阅
tridium.com 发布的产品手册。
Q: Are the digital outputs relay or triac?
A: The Niagara Edge 10 has 3 digital outputs that are triacs rated for 24VAC @ .5 amps.
问: 数字输出类型是继电器还是可控硅？
答: Niagara Edge 10 有 3 个可控硅类型的 DO，额定输出为 24VAC 0.5 安培。
Q: Does the Niagara Edge 10 have Wi-Fi capabilities?
A: No, the Niagara Edge 10 does not have Wi-Fi capabilities. The Niagara Edge 10 is WIRED IP only.
问：Niagara Edge 10 是否具备 Wi-Fi 功能？
答：不，Niagara Edge 10 没有 Wi-Fi 功能。Niagara Edge 10 仅限网线连接。
Q: Does the Niagara Edge 10 have an SD card like the JACE® 8000?
A: No, the Niagara Edge 10 does not have a SD card. The Niagara Framework® software is loaded directly
onto the Niagara Edge 10.
问：Niagara Edge 10 是否有像 JACE®8000 一样的 SD 卡？
答：没有，Niagara Edge 10 没有 SD 卡。NiagaraFramework®软件直接加载到 Niagara Edge 10 上。
Q: Does the Niagara Edge 10 have an internal battery?
A: No, the Niagara Edge 10 does not have an internal battery. The Niagara Edge 10 must be powered via
a Universal Power Supply (UPS), should operation during power failures be a requirement.
问：Niagara Edge 10 是否有内置电池？
答：没有，Niagara Edge 10 没有内置电池。如果要求在停电期间进行操作，Niagara Edge 10 必须
通过通用电源（UPS）供电。
Q: How many RS-485 serial ports does the Niagara Edge 10 have?
A: The Niagara Edge 10 has a single non-isolated RS-485 serial port. The port can be used to connect a
single IO-R-34 or up to 3 Modbus or BACnet devices.
问：Niagara Edge 10 有多少个 RS-485 串口？
答：Niagara Edge 10 有一个非隔离的 RS-485 串口。该端口可用于连接单个 IO-R-34 或最多 3 个
Modbus 或 BACnet 设备。
Q: Does the Niagara Edge 10 have a RS-232 port?
A: No, the Niagara Edge 10 does not have a RS232 port.
问：Niagara Edge 10 是否有 RS-232 端口？
答：没有，Niagara Edge 10 没有 RS232 端口。
Q: Does the Niagara Edge 10 support LON?
A: No, the Niagara Edge 10 does not support LON. The Niagara Edge 10 includes drivers for BACnet,
Modbus and SNMP only.
问：Niagara Edge 10 是否支持 LON？
答：不，Niagara Edge 10 不支持 LON。Niagara Edge 10 仅包含 BACnet，Modbus 和 SNMP 的驱动
程序。
Q: Can the Niagara Edge 10 support the JACE expansion modules?
A: No, the Niagara Edge 10 is unable to support the JACE expansion modules (NPB-8000-2x-485,
NPB8000-LON, NPB-8000-232).
问：Niagara Edge 10 能否支持 JACE 扩展模块？
答：不，Niagara Edge 10 无法支持 JACE 扩展模块（NPB-8000-2x-485，NPB8000-LON，NPB-8000-
232）。
Q: What version of the Niagara Framework is needed for the Niagara Edge 10?
A: The Niagara Edge 10 supports Niagara 4.7 or later.
问：Niagara Edge 10 需要哪个版本的 Niagara Framework？
答：Niagara Edge 10 支持 Niagara 4.7 或更高版本。
Q: Does the Niagara Edge 10 support Niagara AX?
A: No, the Niagara Edge 10 supports Niagara 4.7 or later.
问：Niagara Edge 10 是否支持 Niagara AX？
答：不，Niagara Edge 10 支持 Niagara 4.7 或更高版本。
Q: Does the Niagara Edge 10 run the full version of Niagara?
A: Yes, the Niagara Edge 10 runs the full version of Niagara. All features and functionality of Niagara are
available in the Niagara Edge 10.
问：Niagara Edge 10 是否运行完整版的 Niagara？
答：是的，Niagara Edge 10 运行完整版的 Niagara。Niagara 的所有特性和功能均可在 Niagara Edge
10 中获得。
Q: Can I purchase the Niagara Edge 10 without Niagara software included?
A: No, the Niagara Edge 10 is a bundled product and includes both the hardware and software.
问：我可以在没有 Niagara 软件的情况下购买 Niagara Edge 10 吗？
答：不，Niagara Edge 10 是捆绑产品，包括硬件和软件。
Q: Does the Niagara Edge 10 require an SMA?
A: No, an SMA purchase is not required nor available. The Niagara Edge 10 includes all software updates
released for commercial use by Tridium for the life of Niagara 4, but not for any later versions.
问：Niagara Edge 10 是否需要 SMA？
答：不需要，不需要购买 SMA。Niagara Edge 10 包括所有 Tridium Niagara 4 生命周期发布的软件更
新，但不包括任何更高版本。
Q: How is the Niagara Edge 10 licensed?
A: The Niagara Edge 10 comes with a license that includes 3 devices and/or 50 points. The Niagara Edge
10 includes BACnet, Modbus and SNMP drivers. The Niagara Edge 10 does not have any option or
upgrade packs to increase the number of points or devices.
问：Niagara Edge 10 如何获得许可？
答：Niagara Edge 10 附带的许可证包括 3 个设备和/或 50 个点。Niagara Edge 10 包括 BACnet，
Modbus 和 SNMP 驱动程序。Niagara Edge 10 没有任何选项或升级包来增加点数或设备数量。
Q: Can I add more points or devices to my license?
A: No, the Niagara Edge 10 comes with a standard license that includes 3 devices and/or 50 total points.
The Niagara Edge 10 does not have any option or upgrade packs to increase the number of points or
devices.
问：我可以在许可证中添加更多积分或设备吗？
答：不，Niagara Edge 10 附带标准许可证，包括 3 个设备和/或 50 个数据点。Niagara Edge 10 没有
任何选项或升级包来增加点数或设备数量。
Q: Can I add drivers to the Niagara Edge 10?
A: No, the Niagara Edge 10 is limited to BACnet, Modbus and SNMP. No other drivers are supported on
the Niagara Edge 10.
问：可以将驱动程序添加到 Niagara Edge 10 吗？
答：不，Niagara Edge 10 仅限于 BACnet，Modbus 和 SNMP。Niagara Edge 10 不支持其他驱动程
序。
Q: What standard drivers are included with the Niagara Edge 10?
A: The Niagara Edge 10 comes with standard drivers for Modbus, BACnet and SNMP. These drivers can
be used for both serial and IP connections where applicable.
问：Niagara Edge 10 包含哪些标准驱动程序？
答：Niagara Edge 10 附带 Modbus，BACnet 和 SNMP 的标准驱动程序。这些驱动程序可用于串行和
IP 连接（如果适用）。
Q: How many external devices can I connect via the IP or RS-485 serial network on the Niagara Edge 10?
A: The Niagara Edge 10 supports 3 devices or up to 50 total points on the IP and/or RS-485 serial
network.
问：我可以通过 Niagara Edge 10 上的 IP 或 RS-485 串行网络连接多少外部设备？
答：Niagara Edge 10 在 IP 和/或 RS-485 串行网络上支持 3 个设备或最多 50 个点。
Q: How many IO R modules can I connect to the Niagara Edge 10?
A: You may connect a single IO-R-34 to the Niagara Edge 10.
问：可以连接多少个 IO 模块到 Niagara Edge 10？
答：您可以连接一个 IO-R-34 到 Niagara Edge 10。
Q: Can I connect an IO-R-16 to the Niagara Edge 10?
A: No, the Niagara Edge 10 only supports a single IO-R-34.
问：我可以将 IO-R-16 连接到 Niagara Edge 10 吗？
答：不，Niagara Edge 10 仅支持单个 IO-R-34
Q: Does the IO-R-34 consume capacity from my Niagara Edge 10 core license?
A: No, the IO-R-34 operates over the NRIO network (Niagara Remote IO network), which, like
niagaraDriver, is excluded from capacity restrictions on the Niagara Edge 10.
问：IO-R-34 是否消耗了我的 Niagara Edge 10 核心许可证的容量？
答：不，IO-R-34 在 NRIO 网络（Niagara 远程 IO 网络）上运行，与 niagaraDriver 一样，
NiagaraDriver 不受 Niagara Edge 10 的容量限制。
Q: What is the default IP address for the Niagara Edge 10?
A: Upon first startup when IP connectivity is detected, the Niagara Edge 10 initially requests an IP
address via DHCP. If a DHCP address is not found, the Niagara Edge 10 falls back to a static IP address
based on its serial number.
问：Niagara Edge 10 的默认 IP 地址是什么？
答：首次启动时检测到 IP 连接时，Niagara Edge 10 最初通过 DHCP 请求 IP 地址。如果未找到 DHCP
地址，Niagara Edge 10 将根据其序列号回退到静态 IP 地址。
Q: How can I determine the fallback static IP address of my Niagara Edge 10 based on its serial number?
A: The static IP address is determined based on the the serial number. The IP address will be set to
192.168.1xx.xx, where xx.xx is the last 4 digits of the serial number. For example, if the serial number is
123456789, the fallback IP address would be 192.168.167.89.
问：如何根据序列号确定 Niagara Edge 10 的后备静态 IP 地址？
答：静态 IP 地址是根据序列号确定的。IP 地址将设置为 192.168.1xx.xx，其中 xx.xx 是序列号的最后 4
位数。例如，如果序列号为 123456789，则回退 IP 地址将为 192.168.167.89。
Q: What is the subnet mask of my fallback static IP address?
A: 255.255.0.0
问：Niagara Edge 10 备用静态 IP 地址的子网掩码是什么？
答：255.255.0.0
Q: The Niagara Edge 10 includes two Ethernet ports, how are they different than the JACE 8000?
A: The JACE 8000 has two Ethernet ports that are isolated, meaning that they cannot route data
between the two ports and are not capable of daisy chaining. The Niagara Edge 10 includes two
Ethernet ports that are capable and by default will route data between the two ports to allow for daisy
chaining.
问：Niagara Edge 10 包括两个以太网端口，它们与 JACE 8000 有何不同？
答：JACE 8000 有两个隔离的以太网端口，这意味着它们无法在两个端口之间路由数据，也无法进行菊花
链连接。Niagara Edge 10 包含两个以太网端口，默认情况下可以在两个端口之间路由数据，以实现菊花
链。
Q: When set to daisy chain mode, what are the IP addresses of my two Ethernet ports?
A: In daisy chain mode, the IP address of the two Ethernet ports are identical and have an address set by
a DHCP server, a fallback static address or user defined address.
问：当设置为菊花链模式时，Niagara Edge 10 的两个以太网端口的 IP 地址是什么？
答：在菊花链模式下，两个以太网端口的 IP 地址相同，并且具有由 DHCP 服务器设置的地址、默认静态地
址或用户定义的地址。
Q: Can my Ethernet ports be isolated (non-daisy chain mode)?
A: Yes, the Niagara Edge 10 defaults to daisy chain mode, however the Ethernet ports can be configured
to be isolated (non-routable), similar to the JACE 8000.
问：我的以太网端口是否可以隔离（非菊花链模式）？
答：是的，Niagara Edge 10 默认采用菊花链模式，但以太网端口可以配置为隔离（不可路由），类似于
JACE 8000。
Q: What are the IP addresses of my two Ethernet ports if the Niagara Edge 10 is configured to be
isolated (non-daisy chain mode)?
A: If the Niagara Edge 10’s Ethernet ports are configured to be isolated, the primary IP address will
default to the DHCP or fallback address. The secondary IP address will be defined by the user. The
primary IP address may also be defined by the user.
问：如果将 Niagara Edge 10 配置为隔离（非菊花链模式），我的两个以太网端口的 IP 地址是多少？
答：如果 Niagara Edge 10 的以太网端口配置为隔离，则主 IP 地址将默认为 DHCP 或默认地址。辅助
IP 地址将由用户定义。主 IP 地址也可以由用户定义。
Q. Can I connect the Niagara Edge 10 to my Niagara Supervisor?
A: Yes, the Niagara Edge 10 can be added to a Niagara Supervisor’s network and managed just like any
other Niagara device.
问：我可以将 Niagara Edge 10 连接到我的 Niagara supervisor 吗？
答：可以，Niagara Edge 10 可以添加到 Niagara Supervisor 的网络中，并像任何其他 Niagara 设备一
样进行管理。
Q. Can I connect the Niagara Edge 10 to my JACE 8000?
A: Yes, the Niagara Edge 10 can be added to a JACE 8000’s network and managed just like any other
Niagara device.
问：我可以将 Niagara Edge 10 连接到我的 JACE 8000 吗？
答：可以，Niagara Edge 10 可以添加到 JACE 8000 的网络中，并像任何其他 Niagara 设备一样进行管
理。
Q: What agency certifications does the Niagara Edge 10 have?
A: Please see the Niagara Edge 10 data sheet posted in the Resource Library on tridium.com for the
most up-to-date information.
问：Niagara Edge 10 有哪些认证？
答：请参阅 tridium.com 上资源库中发布的 Niagara Edge 10 用户手册，以获取最新信息。
Q: What environmental conditions can the Niagara Edge 10 operate in?
A: Operating temperature: -20 to 60 oC; Storage temperature: -40 to 85 oC; Humidity: 5% to 95% - non
condensing; Shipping and vibration: ASTM D4169, Assurance Level II
问：Niagara Edge 10 可以在哪些环境条件下运行？
答：工作温度：-20 至 60 ℃; 储存温度：-40 至 85℃; 湿度：5％至 95％ - 非冷凝; 运输和振动：ASTM
D4169，保证等级 II
Q: Does the Niagara Edge 10 have a brandable clip like the JACE 8000?
A: No, the Niagara Edge 10 does not have a brandable clip like the JACE 8000. Instead, the Niagara Edge
10 is branded by printing directly on the case.
问：Niagara Edge 10 是否有像 JACE 8000 这样的可替换的品牌壳？
答：不，Niagara Edge 10 没有像 JACE 8000 这样的可替换品牌壳。相反，Niagara Edge 10 的品牌是直
接印在设备壳体。
Q: Does the Niagara Edge 10 require rebranding?
A: Yes, the Niagara Edge 10 does require rebranding. Please contact your OEM about their branded
Niagara Edge 10 solution.
问：Niagara Edge 10 是否需要重贴品牌？
答：是的，Niagara Edge 10 确实需要重贴品牌。请联系您的 OEM，了解他们的品牌 Niagara Edge 10
解决方案。
Q: When does the warranty start on the Niagara Edge 10?
A: The hardware warranty starts when purchased from Tridium and is valid for 18 months.
问：Niagara Edge 10 何时开始保修？
答：硬件保修从 Tridium 购买时开始，有效期为 18 个月。
Q: If the hardware fails, what is the warranty process?
A: Please contact your distributor for details.
问：如果硬件出现故障，保修流程是什么？
答：请联系您的经销商了解详情。
PS:老王自控致力于解决行业痛点，整合行业资源，技术交流和项目合作，联系方式bacnetsc@163.com或者vx/QQ123772636。
