PELCO(派尔高）品牌源自美国加州克洛维斯，在相当长一段时间是世界上最大的视频监控系统产品制造商之一；2007年，全球能效管理专家施耐德电气收购派尔高公司，为客户提供安防基础设施和安全解决方案。目前品牌归属于摩托罗拉。

目前pelco品监控摄像机在市场上较为少见，不过在一些单位、外企等场景下依然能够见到它的身影。pelco的网络摄像机使用怎么配置工具呢？PELCO摄像机使用pelco协议，大部分也支持onvif协议，可以接入海康威视等品牌NVR使用。

pelco品牌网络摄像机配置工具软件下载地址：https://files.pelco.com/Camera-Configuration-Tool/Camera-Configuration-Tool-2.8.0.0.exe。

将软件下载到电脑上，点击安装，然后登陆，即可进入工具页面：

可以看到，在摄像机配置工具页面，具有“常规”、网络、图像设置，管理员用户、所有配置等选项，可以搜索pelco品牌的摄像机，进行参数配置。

工具软件的部分功能说明如下：

Finding Cameras

If a camera is not auto-discovered by the Camera Configuration Tool, it may be on a different subnet that is not configured to allow multicast messaging. You can manually discover cameras and add them to the tool for configuration.

1. In the top-right corner, select  > Add Devices by IP.

2. To find one camera:

• Enter the IP address of the camera in the Start IP Address field. Leave the End IP Address (Optional) field empty.

• Enter the IP address range. Enter the first IP address in the Start IP Address field, and the last IP address in the End IP Address (Optional) field.

  The Number of IP Addresses area displays the total number of IP addresses included in the IP range. The tool will search for no more than 65,536 addresses at a time.

The tool searches through all the addresses in the IP address range, and does not stop until all the IP addresses have been checked or you click Cancel.

Editing Cameras

In the Camera Configuration Tool, you can edit all the cameras that you have successfully logged into.

Move between different tabs to see and edit the categorized camera settings. For more information, see Setting Tabs.

You can only edit the cameras that are displayed. To edit specific cameras, you can filter the camera list. For more information, see Filtering and Sorting Cameras.

Tip: As you edit the camera settings, you can disable camera filters but you cannot add new filters until after the setting changes have been either applied or discarded.

You can edit any column that displays .

Editing a Single Camera

To edit a setting for a single camera, do one of the following:

• Select a setting from the options available.

• Double-click the camera setting, then enter a new value.

The edited setting is highlighted in yellow but is not yet applied. See Applying Changes.

Note: Changes made to the HD Multisensor Dome camera are automatically applied to all camera heads.

Editing Multiple Cameras

To edit the same setting for all cameras in the camera list:

1. In the column heading, click .

2. Select or enter the new setting.

3. Press Enter or click Apply to change the setting.

The edited settings are highlighted in yellow but are not yet applied. See Applying Changes.

Applying Changes

Edited settings are highlighted in yellow.

To apply all changes:

• Click Apply to validate the changes.

If the camera rejects a setting, the camera row is highlighted in red and the rejected setting is highlighted in yellow.

In the bottom-right implementation area, click  next to FAILED to display only cameras with rejected settings.

To clear all changes:

• Click Discard.

更多弱电资讯，欢迎关注交流。