No. | Title | Author |
Routes for Low Carbon Development of High Temperature Industries and Refractories Industry | ||
1 | Effect of Si, Graphite Addition and Temperature on the Properties of Magnesium Matrix Composites Prepared from Magnesite Tailings | YUE Jingjing, ZHAO Xin, YOU Jiegang, ZHANG Qitao |
2 | Comprehensive Performance of Composite Materials Based on Forsterite and Chloride Salts with SiO2 Nanoparticles for Thermal Energy Storage | LIU Wenyuan, LIU Hao, WANG Zhoufu, MA Yan, WANG Xitang |
3 | Challenges and Opportunities Facing the Development of China's Refractories Industry | LI Yongquan, RUN Zizhen |
4 | Influence of Cr2AlC on the Thermal Shock and Corrosion Resistance of Low Carbon Al2O3-C Refractory | WU Zihao, CHEN Junfeng, YAN Wen, WEI Yaowu, ZHANG Shaowei, LI Nan |
5 | Dynamic Failure of Magnesia-carbon Refractories Under Dynamic Impact Loading | Zhenjingwen FU, Yajie DAI, Xiaofeng XU, ZHU Tianbin, Wei ZHANG, Jiajun ZHANG, Kirill ANDREEV, Yawei LI |
6 | Effect of Al2O3/SiO2 on the Structure and Properties of Porous Forsterite-spinel-periclase Ceramics | HUANG Zhenni, ZHAO Fei |
7 | Enhanced Thermal Shock Resistance of Low-carbon Al2O3-C Refractories via CNTs/MgAl2O4 Whiskers Composite Reinforcement | FENG Chunzhuo, XIAO Guoqing, DING Donghai |
8 | The Characteristics of Typical Calcium Aluminate Cement and its Influence on Hardening of Ablation Resistant Materials | WANG Hanyu, LI Haixu, ZHAN Huasheng, LIU Xiaoguang, ZHENG Hua,WANG Fengyu, SUN Huochang, ZHAO Yan, YANG Hao, FENG Zikuo, ZHAO Shaowei |
9 | Influence of Metakaolin on the Mechanical Properties of Aluminum-Silicon Materials | ZHENG Hua, HE Haobo, ZHAN Huasheng, LIAO Ning, LI Yawei, LI Runfeng, ZHAO Yan, FENG Zikuo, YANG Hao |
10 | The Influence of Different Aluminum and Silicon Sources on the Performance and Microstructure of Silicon Carbide Bricks | MA Shulong, YAN Junjie, YANG Chen, MA Fei, CAI Binli, GAO Changhe |
11 | Study on the Erosion and Application of Refractory Materials By Hazardous Waste Rotary Kiln Slag | WANG Fengyu, CAI Binli, FAN Mingming, WAN Jianqiang, ZHAI Zhiheng, LUO Huaming, ZHAN Huasheng, WEI Yaowu |
12 | Effect of Typical Binder on Properties of Chrome-corundum Castable | ZHAO Yan, ZHAN Huasheng, YANG Hao, LI Haixu, FENG Zikuo, WANG Hanyu |
13 | Study on the Preparation and Microstructure of Mg4.68Al2.64Zr1.68O12 Ternary Metastable Phase by Spark Plasma Sintering | WANG Shaoyang, GAO Changhe, LUO Huaming, LI Yong, MA Chenhong |
14 | New Application Technology of Environmentally Friendly Low-carbon Refractories for Refining Steel Ladles | FANG Binxiang, CAO Hua, WEI Guoping |
Refractory Raw Materials | ||
15 | Exploring the Sintering Mechanism of Micro Magnesite Based on Thermal Decomposition and Sintering Kinetics | ZHANG Ruinan, LIU Zhaoyang, YU Jingkun |
16 | Purification of Salt Lake Brine by Dissolution Precipitation Method for Preparation of Light Burned Magnesia and Sintered Magnesia | ZHU Jiaqi, WEN Tianpeng, JIANG Lixin, ZHANG Ruinan, YU Jingkun |
17 | Development and Application of Electrofused Barium Zirconate | YU Xinmeng |
18 | Effect of Phase Composition and Microstructure of 97 Fused Magnesia with Different Additions of Concentrations of Fine Ore Powder | ZHAO Xin, YUE Jingjing, YOU Jiegang |
19 | Preparation of Bauxite Based Low-alumina Mullite and Its Influence on Energy-saving Long-life Refractory Materials for Cement Kilns | AN Jiancheng, MA Shulong, LIAN Weikang, WANG Yali, LI Yanjing, LUO Huaming |
20 | The Andalusite Advantage for Sustainable Refractory Materials | Christopher PARR, Chunfeng LIU, Christoph WÖHRMEYER, Jianying GAO, Florian AHOUANTO, Elodie CHABAS |
21 | Research Progress on the Application of Secondary Aluminum Dross in Refractories | WANG Chunxin, WANG Rixin, HUANG Yan, QU Dianli , GUO Yuxiang, LUO Xudong |
22 | Reactivity of Coconut Shell Carbon and Si/Al Powders in Low Carbon Al2O3-C Material | TIAN Xuekun, ZHAO Zhenyi, LIU Xusheng, YIN Tianpei, LIU Jinhua, LIU Xinhong |
23 | Research Progress in Preparation of h-BN Containing Ceramics | LIU Xusheng, TIAN Xuekun, ZHAO Zhenyi, YAN Donghong, LIU Xinhong, HOU Xinmei |
24 | Effect of La2O3 on the Structural, Physical, and Mechanical Property of Magnesia Refractory | JI Peng, ZHENG Qi, YU Jingkun, YUAN Lei |
25 | Research Progress on Ti2O3 Containing Refractories | LIU Yue, LI Yong, MA Chenhong, ZHI Jiashuang |
26 | Effect of Calcination System on the Performance of Flotation Magnesite to Prepare High-purity Sintered Magnesia | QIN Jiachen, WANG Chunyan, ZHENG Lianying, SU Xinsu, LUAN Jian |
27 | Preparation of MgO Nanoparticles Based on Microcrystalline Magnesite and their Antimicrobial Properties | YIN Ziyang, LI Si, LI Xiang, SHI Wuyang, WANG Anxiu, MA Chengliang |
28 | Enhancing Sintered Magnesia Properties through ZnO and NiO Additives | LI Si, YIN Ziyang, LI Xiang, SHI Wuyang, WANG Anxiu, CHEN Liugang, MA Chengliang |
29 | Improvement of Al2O3-SiC-C Castable by Si-N-O Composite Micropowder | LI Youqi, HE Jian, FU Lyuping, ZHANG Jialiang, LYU Xusheng, LI Zhengkun |
30 | Preparation of BN@SiO2 Nanofiber Ceramic Aerogel with Ultralight, Wave-transparent and Heat-insulating for Microwave Sintering Furnace | SONG Zijie, ZHANG Fan, JIANG Kexin, FAN Bingbing, WANG Hailong, ZHANG Rui, LI Hongxia, CHEN Yongqiang |
31 | Synthesis and Application of Heavy-density Calcium Hexaluminate | YAN Li, LI Dongmei, LI Hongcha, LI Lu, YE Qing, SHAO Changbo, CHEN Zhiqiang, LIU Xing, SHI Gan |
32 | Exploring New Aluminum Ash Treatment Processes from DTA-TG of Aluminum Ash | LIANG Yanchen, CHANG Jijin, LIU Ertao, QIAN Yuejin, YU Renhong, LI Mancang, GUO limeng |
33 | Application of High-calcium Magnesia with Low Silica & Low Ferric Oxide and its Purification Effect on Molten Steel | TIAN Xiaoli, LI Zhixun, FENG Runtang, LIU Cheng, XING Xiangdong |
34 | Effect of Hollow Aggregate on Mechanical Properties of Lightweight MgO-MgAl2O4-C Refractory | HUANG Ke, YIN Chaofan, WANG Li, YU Renhong, DONG Binbin, ZANG Yunfei, LIANG Yanchen, LI Mancang, QIN Feng |
35 | Preparation of Ti-Al System MAX Phase by in-situ Nitridation of Ti-Al Alloy using Ti6Al4V as Ti Source | LI Mancang, YU Renhong, ZANG Yunfei, MENG Dongxu, YU Xiaorui, LIANG Yanchen, HUANG ke |
Monolithic Refractories | ||
36 | Effect of Carbon Black on the Properties of Al2O3-SiC-C Castables | CHEN Jing, SANG Mengyang, HE Mantang, ZHOU Pingyi, LIU Jintong, LIU Xinhong, JIA Quanli |
37 | The Research About the Influence of Matrix Compositions of Magnesia-silica Based Lightweight Castable on its Properties | LIU Yabo, GUO Qiwei, WANG Xin, ZHOU Mengxue, MENG Qingxin |
38 | Preventing Crack Formation in Magnesia Castables Using Novel Binder System and Drying Agent | PENG Hong |
39 | Study on the Preparation and Properties of Phosphoric Acid Bonded Plastic Refractory with Long Storage Period | LI Zhenzhen, KANG Haobin, WANG Cheng |
40 | Research and Application of Ultra-low Carbon Tundish Coatings | YUAN Keke, WANG Shuming, CHEN Yang, ZHENG Xiaoping, CHEN Changping |
41 | Preparation and Properties of Ultra-lightweight Alumina Bubble Castables by Matrix Foaming | ZHAN Xuewu, QI Jin, FAN Qingsong, ZHANG Wei |
42 | Effect of Zn(OH)2 Addition on the Properties of Corundum-Spinel Castables | DONG Yifan, SANG Mengyang, LIU Jintong, QIU Xin, LIU Xinhong, JIA Quanli |
43 | Test and Simulation of Thermal Insulation Performances of CA6 Based Castables | ZHAO Yi, YANG Haizhen, LUO Wei, XIA Yufeng, DING Cuijiao, YUAN Wenjie |
44 | Effect of Different Silica Sources on the Formation of Xonotlite Fibers | WANG Dejing, WANG Wenwu |
45 | Effect of CA2 on the Properties of High Purity Corundum Castables | ZHOU Huijun, LI Bin, CAO Zhuang, QIN Hongbin, XIAO Jiazhi, LI Zhe, LIU Hongbo, ZHANG Sanhua |
46 | Effect of Alumina on Properties of Carbon-free Precast Block Castable | ZHANG Kaige, LI Demin, ZHANG Lianjin, YANG Qiang, ZHANG Zheming |
47 | A Study on Gelling and Strength Development of Colloidal Silica Castbales in Correlation to the Humidity and Setting Conditions | Horn S, Dr. Setzer C, Edinger M, Lippold K |
Refractories for Iron and Steel Industry | ||
48 | Corrosion of RH Refining Refractory in Steelmaking Process | CHU Rensheng, LIU Jingang, ZHANG Lijun, LI Zhanjun, SHI Zhiqiang, CUI Yuanyuan |
49 | Microstructure Evolution and Performance Enhancement of MgO-C Refractories by the Addition of MA90 Spinel Micro-powder | ZHONG Hutang, HAN Bingqiang, LIU Xuexin, ZHENG Miao |
50 | Bubble Trapping Technology for Inclusions in Tundish | CUI Yuanyuan, ZHONG Kai, SHAO Junning, ZHANG Yanbin, JIA Xiangchao |
51 | Y2O3-Al Composite Material: Enhanced with In-situ Generation of Secondary Reinforcing Phase | SONG Haokai, WANG Zhoufu, LIU Hao, MA Yan, WANG Xitang |
52 | Novel Monolithic Refractories for Ironmaking | ZHANG Yanli, ZHANG Xiaohui, CHENG Qingxian, WANG Xiaoli, PENG Xigao |
53 | The Effect of In Situ-synthesized Y2SiO5 on the Thermal Shock Resistance of Y2O3 Ceramic Materials | FANG Pingtao, WANG Zhoufu, QUAN Zhenghuang |
54 | Effect of Pyrophyllite Addition on Properties of Al2O3-SiC-C Brick for Torpedo Car | JIA Zhihao, FAN Chongyang, ZHANG Xuebing, LI Qinglin, ZHANG Rui, MENG Qingxin |
55 | Enhanced Oxidation Resistance and Thermal Shock Resistance of Low-carbon MgO-C Refractories with Addition of Ti(C,N) Powder | CHEN Qilong, LI Tianqing, LIU Cheng, GAO Jie, MENG Hongtao, ZUO Qixiu, ZHANG Qian, YUAN Hailing |
56 | Effect of Microporous Corundum Aggregates on Thermal Shock Resistance of Corundum Spinel Castables for Setting Block | ZHANG Sisi, LIU Guotao, LI Tianqing, LI Zongzhe |
57 | Enhancing Thermal Insulation Performance in Al2O3-SiC-C Castables via Boehmite Addition and In-Situ Growth of Mullite Whiskers | XU Zhiyuan, YANG Yue, LUO Wenjing, LI Rong, ZHEN Qiang |
58 | Preparation of ZrC Whiskers and Its Effects on High Temperature Thermal Shock Resistance and Oxidation Resistance of Al2O3-SiC-C Castables | LIU Bangbang, LI Wenhao, XU Zhiyuan, LI Rong, ZHEN Qiang |
59 | Mathematical Modeling on Corrosion Mechanism of Al2O3-MgO Refractory by CaO-Al2O3-MeO Slag | LIU Chang, WANG Qiang, LI Guangqiang, YAN Wen, WANG Zhanmin |
60 | Microstructural Evolution and Properties Enhancement of MgO–CaO Materials by Doping Different Rare Earth Oxides | DONG Yunjie , WANG Zhoufu, MA Yan, LIU Hao, JIN Hulin, DENG Chengji |
61 | A Coupled Numerical Model for Predicting Magnesia Refractory Damage Behavior in High-Temperature Reactor | WANG Qiang, LIU Chang, HE Zhu, YAN Wen, LI Guangqiang, WANG Zhanmin |
62 | Research and Application of Long-life MgO-C Slide Plates for Ca-treated Steel | LI Wei, TONG Zeming, LI Yanming, HUANG Yuqin, TANG Chunxin |
63 | Study of the Effect of Carbon Deposition Reaction on Refractories in CO-H2 Atmosphere and its Failure Mechanism | FENG Yihang, LIU Guoqi, LI Hongxia, YANG Wengang, ZHAO Xinyu, QIAN Fan |
64 | Interfacial Reaction between the Steel and the Al2O3-MgO-C Refractory | ZHAO Mingzhe, REN Qiang, ZHANG Lifeng |
65 | Effect of Refractory on Cleanliness of Molten Steel | ZHANG Lifeng, REN Ying |
66 | Dynamic Interaction between Magnesia Refractory and a High Carbon SiMn-killed Steel | CHENG Yujie, REN Qiang, ZHANG Lifeng |
67 | Kinetic Model on the Erosion Behavior between Refractory and Slag During Refining Process | LYU Binyu, ZHANG Lifeng |
68 | Preparation and Characterization of Silica Sol Bonded Bauxite Self-flowing Castable with Expansion Behavior | ZHU Bin, WANG Jingjing |
69 | Brittleness Reduction of Al2O3-C Refractories: Microstructure Evolution and Role of Carbon Fibers | MIAO Zheng, CHEN Junfeng, WU Zihao, YAN Wen, ZHANG Shaowei, LI Nan |
70 | Comparative Study on Microstructures and Properties of Al2O3-MgAl2O4-C Ceramic Filter and Al2O3-C Ceramic Filter | SONG Jinwen, YAN Wen |
71 | Role of Nano-oxides for Improvement Properties of Al2O3-ZrO2-C Materials | ZHAO Zhenyi, TIAN Xuekun, LIU XuSheng, YIN Tianpei, LIU Jinhua, YAN Donghong, LIU Xinhong |
72 | Brittleness Reduction of Low-carbon Al2O3-C Refractories with In-situ Formation MgAl2O4/CNTs Layer Between Aggregate and Matrix | LUO Jiyuan, JIN Shengli, CHONG Xiaochuan, DING Donghai, XIAO Guoqing |
73 | Research and Application of Eco-friendly High-Strength Taphole Clay | CHANG Bing, WANG Qingheng, LI Minghui, JIANG Yaqiang, TONG Shengli |
74 | A PURMETALL Review of Ladle Well Filler Dynamics in Steel Making Process | Tim BREITZMANN, Marcel BASTIAN |
75 | Effects of SiC/ZrO2 Ratio on the Key Service Performance of BN-ZrO2-SiC Composites | LIU Guoqi, WANG Minghui, QIAN Fan, HE Yuanhang, LI Hongxia, CHEN Yongqiang |
76 | Effect of Silicone Resin on the Properties of Spinel Carbon Refractories | SUN Xudong, WANG Juntao, HU Jianhui, CHEN Songlin, ZENG Limin, ZENG Kun, XIAO Gen |
77 | Influence of Al2O3 Content on Microstructure and Oxidation Resistance of Glass-ceramic Coatings for 06Ni9DR Alloy Steel | YANG Qibao, SANG Shaobai, YANG Fuyun, LI Yawei, ZHU Tianbin, WANG Heng |
78 | Effect of Resin Coated Alumina Aggregates on the Properties of Alumina-spinel Castables for Purging Plugs | LIU Jintong, ZHAO Li, JIA Gaoyang, WANG Shijie, CUI Junyan, GUO Hongxiang, LIU Xinhong, ZHANG Shaowei, JIA Quanli |
79 | Performance Optimization of Cement Free Alumina Magnesia Dry Gunning for Steel Ladle | Yitao WANG, Chunxia CHEN, Johnson LEE |
80 | Discussion on the Trend of Refractory Materials for Blast Furnace Inner Lining | SUN Saiyang, MA Xiaoqing, ZHANG Ronghui, CHENG Minghui |
81 | Development and Application Practice of a New Type of Plastic for Repairing Water-cooled Beams in Heating Furnaces | LI Xinjian, ZHANG Xinghua, HUANG Feng, JIN Congjin, LI Jie |
82 | Effect of Thermal Shock Resistance of Particle-level Paired Si3N4/Si2N2O-SiC Materials | XIANG Yubo, ZHENG Han, LING Xiaxia, MA Zhaoyang, WU Jiguang |
83 | Application of Reduction Slag from Microcrystalline Magnesite to Magnesium in Corundum Spinel Castable | WANG Xuepei, TIAN Xiaoli |
84 | Effect of Slag Composition on the Degradation Behavior of Tundish Lining and Stainless Steel Cleanliness | Shengchao DUAN, Joo Hyun PARK, Lifeng ZHANG |
85 | Damage Analysis of the Si3N4-SiC Brick Used in the Enclosure Pipe of COREX | ZHAO Xinyu, YANG Wengang, MU Yuandong, WU Jiguang, XIANG Yubo, YE Guotian |
86 | Hot Blast Stoves and Choice of Refractories | Ing.Stanislav DVORAK |
Refractories for Nonferrous, Cement, Glass and Other Industries | ||
87 | Preparation and Properties of Reactive MgO Bonded SiC-MgAl2O4 Castables | GAO Guangze, CHEN Liugang, SUN Honggang, LI Hongxia |
88 | Effect of Pre-synthesis LaNbO4 Phase Additive on the Thermal Shock Resistance of Y2O3/LaNbO4 Composite Materials | QUAN Zhenghuang, WANG Zhoufu, LIU Hao, MA Yan, CHENG Changgui, WANG Liwang |
89 | Research Progress of the Refractory Saggar for Loading Lithium Battery Cathode Materials at High Temperatures | LIU Xin, MENG HongTao, MA Longbin |
90 | Corrosion Mechanisms of Alumina–chromia Refractory in Bottom-blown Copper Converting Furnace: A Post–mortem Analysis | LI Junxia, DUAN Feng, LI Tianqing, DING Donghai, DONG Yue, YAN Guanghui |
91 | Performance Variations of Light Burned Magnesium under Different Calcination Parameters and its Effects on Magnesium Oxysulfate Cement Preparation | ZHOU Junfeng, GUAN Yan, HU Zhiqi, BI Wanli, CHANG Jun, ZHANG Tingting |
92 | Effect of IB Content on the Preparation of Magnesia Porous Ceramics by Gel-curing-foaming Method | SUN Gege, LI Guohua, KANG Chi, TIAN Lin, JIAO Changfa |
93 | Research on Structure and Properties of the Fused Cast AZCS Refractory | MAO Limin, YANG Haiyun,WANG Juntao, ZENG Haijun, WEI Han, HE Zehong |
94 | Effect of Fe-TiCN Powder on the Properties of Corundum-mullite-silicon Carbide-based Refractory Castables Containing Spherical Aggregate Used for Waste Incinerator | YANG Mengyao, YANG Yifan, QIAN Kun, DENG Tong, HU Siming, LIU Jingyi, JIANG Yuena, MI Ruiyu, MIN Xin, HUANG Zhaohui |
95 | A Practice to Reduce Surface Heat Dissipation of Decomposition Furnace & Rotary Kiln with Implementation of Insulation Materials | YAO Yanfei, CHEN Yanxing, DING Songxiong |
96 | Study on the Impact Resistance of Nitride Bonded Silicon Carbide Products | LYU Chunjiang, CAO Huiyan, XIANG Yubo, ZHENG Han |
97 | Phase and Microstructure Evolutions of Fiber Reinforced Aerogel Composites with Thermal Insulation Degradation | ZHAI Pengtao, LIU Zhiqiang, LIU Xiaolei, ZHAI Ningxiao, LIU Xiaolong, LI Ran |
98 | Flexibility of Various Spinels-Containing Basic Refractories for Cement Rotary Kilns | GUO Zongqi, DING Haiwei, DAI Yajie, DANG Xiaomei, GAO Jianying, YUAN Wenjie |
99 | The Characteristics of Typical Calcium Aluminate Cement and its Influence on Hardening of Ablation Resistant Materials | ZHAN Huasheng, LI Haixu, WANG Hanyu, LIU Xiaoguang, ZHENG Hua, WANG Fengyu, SUN Huochang, ZHAO Yan, YANG Hao, FENG Zikuo, ZHAO Shaowei |
100 | Preliminary Experimental Study on Mitigation Routine of Heavy Metals as Contained in Municipal Sludge within A Cement Kiln System | LI Binbin, FAN Haihong, DING Songxiong |
101 | Preparation and Properties of Mullite-silicon Carbide Refractory with Low Content of Silicon Carbide | HAN Cangjuan, TANG Hu, ZHANG Meijie, GU Huazhi |
Advanced Techniques and Equipment for Production, Testing, Evaluation and Installation of Refractories | ||
102 | Numerical Simulation Study on the Influence of Continuous Operation System of Shuttle Kiln on Thermal Loss of Its Kiln Body | ZHANG Rui, LI Qinglin, FAN Chongyang, ZHANG Xuebing, JIA Zhihao, MENG Qingxin |
103 | Decarbonisation of Slide Gate Production and High Temperature Tempering | Markus GERSTNER |
104 | Design of Ladle Lining Thickness Measurement System Based on Three-dimensional Laser Scanning Technology | FU Qiuhua, ZENG Mingzhu, GAO Jie, ZUO Qixiu, LI Tianqing |
105 | Application of X-ray Computed Tomography in Testing of Shaped Refractories | ZHI Jiashuang, LI Yong, GAO Yuan, MA Chenhong, LIU Yue |
106 | Thermal Stress Analysis of Ladle Refractory Under Coupled Temperature and Stress Fields Based on ANSYS Software | XIE Chongchong, TIAN Lin, LI Guohua, LIU Xiaoyan, LIN Haoxin |
107 | Preliminary Exploration of an Environmentally Friendly Binder for MgO-C Bricks and Its Performance Evaluation | ZHANG Ling, XI Jianfei, NIU Shunan, ZHOU Chi, TANG Mingshuo |
108 | Damage Analysis of Thermal-shock Failure in Isostatically Pressed Carbon-Bonded Refractories for Continuous Casting of Steel | Kaoutar ANRHOUR, Kirill ANDREEV, Severine ROMERO-BAIVIER, Andrea PICCOLROAZ |
Fundamentals, Education, Standardization, and Patent on Refractories | ||
109 | Interpretation of the National Standard— Green Product Assessment— Refractory Materials | DENG Lina, YI Shuai, BAI Yaning, XIE Jinli, XU Qian, JIANG Chen, JIANG Wenbo |
110 | The Influence of Particle Size Distribution and the Addition of Refractory Waste on the Mechanical Strength and Thermal Shock Resistance of Al2O3-C Refractory Formed by Isostatic Pressing | GAO Zhi, PAN Lei, WANG Zuochuang, YANG Qin |
111 | New Test Methods of Refractory Properties | ZHANG Ronghui, WANG Lili, QIN Ying, DONG Zhanchun |
112 | Insights into Hydration and Hydrate Evolution of CAC-bonded Castables | SUN Xiaogai, ZENG Jinyan, ZHANG Zhongzhuang, MU Yuandong, YE Guotian |
113 | Heat Transfer Mechanism of Refractory Oxides | HAO Bianlei, SUN Guangchao, ZHANG Jiayu, LI Xiang, XU Fatang, LIU Kaiqi |
114 | Cooperative Refractory Research Programs | Christopher PARR, Sido SINNEMA |
115 | Bulk Density Measurement of Refractory Raw Materials – Faster and Better with a Spin Dryer | Andreas BUHR, Geert WAMS, Aniruddha SADHUKHAN, ZHOU Yunpeng, Morgan ZHANG, Shogo KIJIMA, Shankha CHATTERJEE, Gerhard URBANEK |
Life Cycle Assessment and Recycling Solutions for Refractories | ||
116 | Discussing of Al2O3 Functional Ceramic Second Raw Material Used in Corundum Spinel Castable | WEI Yuxi |
117 | Comparative Study on the Thermal Insulation Performance and Service Life of Microporous Mullite Insulating Refractory Materials and Porous Mullite Insulating Refractory Materials | WEI Han, WANG Juntao, QIU Wensi, HU Jianhui, SU Shixun, JIA Quan li, YIN Chaonan, XU Linlin, Sun Xudong, LI Huan |
118 | Problems and Countermeasures of Magnesia Prepared by Flotation Concentrate Powder of Magnesite | ZHANG Ling, XI Jianfei, YANG Yuxuan, YUAN Qichen, WANG Yuxin |
FIRE Special Issues of China's Refractories | ||
119 | How Marie Sklodowska-Curie Doctoral Networks Can Support European Refractory Ecosystem in Context of The European Green Deal | Marc HUGER, Glyn DERRICK, Mossaab MOUIYA, Andrea SALERNO, Kwasi Addo BOATENG, Hrikeshava RANGANATHAN, Amit Kumar GOPE |
120 | Application of Thermodynamic Database to Corrosion of ZrO2 Containing Submerged Entry Nozzle in Steel Continuous Casting Process | In-Ho JUNG |
121 | Novel Brick Technology for Carbon Reduction Footprint in Steel Shop Linings | Carlos PAGLIOSA, Leandro ROCHA, Marcelo BORGES, Celio CAVALCANTE |
122 | Investigation of Refractory Bricks and Oxide Materials Heated in Hydrogen Reduction Conditions | Sangbae CHOI, Raehyeong PARK, Gideok YANG, Yeonghyeon KIM |
123 | Effect of Slag Basicity on Alumina Dissolution and Diffusivity: A High-temperature Confocal Laser Scanning Microsopy Study | Burhanuddin, Harald HARMUTH |
124 | The Role of the Size Effect on the Drying of Refractory Castables—How Its Understanding Could Narrow the Gap between Laboratory Studies and Industrial Reality | M.H.MOREIRA, H. PENG, S. Dal PONT, V. C. PANDOLFELLI |
125 | Study on Chrome-free Purging Plugs for Steel Ladles | Yunpeng ZHOU,Wang FENG, Shankha CHATTERJEE, Andus BUHR, Sebastian KLAUS |
126 | Thermomechanical Modelling of Industrial Vessels that Contain Refractory Masonry Linings | Alain GASSER, Eric BLOND, Thomas SAYET |
127 | The Influence of Biomass Cokes on the Microstructure and Thermal Shock Resistance of MgO－C Refractories | Patrick GEHRE, Magzhan KAPESSOV, Stefan GUHL, Martin GRÄBNER, Christos G. ANEZIRIS |
128 | Exploring Dry-out Behaviour and Explosion Resistance of Microsilica-gel Bonded No-cement Castables | Hong PENG |
129 | Regulation of Pore Structure and High-temperature Fracture Behavior of CAC-bonded Alumina－Spinel Castables Based on Hydration Design | Wenjing LIU, Ning LIAO, Yawei LI |
130 | Investigation on Effect of Composition on the Drying of Castables with Cement Binder | Bruno TOUZO, Hirotaka GOTO, Uwe KLIPPEL, Josh SAYRE, Jeff BOGAN |
131 | Potential of Applying Artificial Intelligence to Hot Metal Logistics Management | Maria Gabriela Garcia CAMPOS, Paul van BEURDEN |
132 | Performance Assessment on Corrosion Resistance of Refractory Materials Based on High-temperature Machine Vision Technology | Chenchen LIU, Ao HUANG, Yan YU, Guoping WEI, Shenghao LI, Huazhi GU |
Abstracts | ||
133 | The Alternative Refractory Magnesia Sources in the Context of Decarbonization | João Victor MENEZES CUNHA, Eric PIRARD, Thomas DRNEK |
134 | The State Key Laboratory of Refractory and Metallurgy | DAI Yajie |
135 | Structure and Thermal Expansion in Cu2-xCoxP2O7 | JIANG Kexin |
136 | Progress of Innovative Aggregates in Optimizing the Performance of Refractories | LI Yawei |
137 | Effect of ICLR on Slag Fluidity and Corrosion Resistance of High Chromium Materials | SU Weiguang, HOU Jiayi, MA Ruiang, GAO Jinghong, SONG Xudong, WANG Jiaofei, LYU Peng, BAI Yonghui, YU Guangsuo |
138 | Preparation of Lanthanum Hexa-aluminate Coated Corundum Aggregates and Its Effects on the Thermal Shock Resistance of Corundum-spinel Castables | FENG Yuan |
139 | Microstructure Evolution in Sintering of Refractory Materials: Phase-Field-Micromechanics Modeling | Qingcheng YANG, Arkadz KIRSHTEIN, Pin WU, Qiang ZHEN |
140 | Preparation of ZrO2-coated Magnesia Aggregates via Impregnation-sintering and Its Impact on the Properties of MgO-C Refractories | JIN Endong, XIAO Guoqing, DING Donghai |
141 | Effect of Magnesia Purity on Non-metallic Inclusions in Steel | LOU Yaoyao |
142 | Preparation and Properties of Oriented Steel Fiber Refractory Castable | LI Minghui, LI Peilin, QI Gang, LI Saisai, CHEN Ruoyu, LYU Siwei, DING Yi |
143 | Comparison of Corrosion Behavior of Primary/modified Nickel Slag with Semi-rebonded Periclase-chromite Refractory | LIU Yuchi, YIN Hongfeng, DING Songxiong, YUAN Hudie |
144 | Finite Elements Simulation of Thermal Shock Resistance of Cordierite-mullite Kiln Furniture Materials Prepared by Introducing Potassium Feldspar | MA Le, LIU Yuchi, YIN Hongfeng |
145 | Effects of SiCnw/Al2O3 Composite Powders on Properties of Al2O3–SiC Refractory Castables | CHONG Xiaochuan, XIAO Guoqing, DING Donghai |
146 | Silicon Carbide Reticulated Porous Ceramics with Enhanced Infrared Radiation via Coatings Design for Porous Medium Combustion | LIANG Xiong |
147 | Metallothermic Reduction Combustion Synthesis of h-BN Composite Powders and Its Application in Refractories | LI Yanjun, ZHENG Xin, DING Donghai, XIAO Guoqing |
148 | A New Type of High-Temperature, Low-Conductivity Refractory Aggregates: Entropy-Stabilized Spinel [(MgxZn(1-x)/2Cu(1-x)/2)(Al0.9Fe0.1 )2O4](x=0.5, 0.6, 0.7, 0.8) | LI Bokang, FU Lyuping |
149 | Fabrication, Properties of Dense CA6 Refractory and Its Reaction Behavior with Titanium Aluminum Alloy | HAN Suzhen |
150 | Research Progress of Refractories for Hydrogen Metallurgy | LIAO Ning, LI Yawei |
151 | Research Progress on Mechanical Properties and High Temperature Stability of Silica Aerogel | TIAN Wukui, CHEN Songlin, DENG Xiaoling |
152 | Development of a Numerical Model of Refractories Based on the Discrete Element Method | Andrey DMITRIEV, Evgeny SHILKO, Aleksandr GRIGORIEV, Kirill ANDREEV |
153 | Mechanical Properties and Gas Permeability of Silica-gel Modified Hydratable Magnesium Carboxylate Bonded Refractory Castables in Drying Process | SUN Luyan, DING Donghai, XIAO Guoqing |
154 | Design of a New Ceramic Castable for Investment Casting of Turbine Blades | Michiel SMEDES, Gruber DIETMAR |
155 | Improvement of Tuyere Used in BOF Bottom-blowing O2-CO2-pulverized Lime | PENG Xiaoyan, ZHANG Yanxiang, GAO Fei, HE Zhiyong, LI Lin, HU Shaoyan |
156 | Wettability and Interfacial Reaction Between K492M Alloy and Al2O3 Shell | CHEN Guangyao, LIAO Houjin, DENG Shaowen, CAI Zheyu, HOU Xinmei, LI Chonghe |
157 | Effects of TiB2 Addition on Densification of Si3N4 -SiC Refractories | LIAN Xiaoqing, LI Tiejun |
158 | Effect of SiC-coated Graphite on Structure and Properties of In Situ Ceramic Bonded Low Carbon Alumina-carbon Refractories | LIU Zhenglong, DENG Chengji, DING Jun, YU Chao, CHENG Changgui |
159 | Preparation of In-situ Ti3Si(Al)C2 Reaction Bonded Low Carbon Al2O3–C Refractories and Its Abnormal Thermal Shock Behavior | XIN Yalou, YIN Hongfeng |
160 | The Effects of MnO2 on the Mechanical Properties and Microstructure of MgO-C-Al Refractories | WEI Juncong, TU Junbo, HUANG Shuaike |
161 | Investigation of the Alumina-Magnesia Reactive Sintering Kinetics for Innovative Refractory Ceramics at High Temperatures | Molla Yehualaw EWNETE, Hong PENG, Olivier CASTELNAU, René GUINEBRETIÈRE |
162 | Comparison of Corrosion Resistance of High Chromia Brick, High Zirconia Brick, Fused AZS Brick, and Si3N4 Bonded SiC Brick Against Coal-water Slurry Gasifier Slag | WANG Juntao |
163 | Effect of High Temperature and Low Velocity Impact Coupling on the Structure and Properties of Carbon Fiber Reinforced Plastics | DING Jun, TANG Zulu, DENG Chengji, LIU Zhenglong, YU Chao, XUE Hua |
164 | Effect of Heat Treatment Temperature on the Synthesis of Lanthanum Aluminate | LIU Xiaoyan, TIAN Lin, LIN Haoxin, XIE Chongchong |
165 | Effect of Rare Earth Oxides on Preparation of Forsterite-periclase Complex Sand from Magnesite Tailings | LIN Haoxin, TIAN Lin, LIU Xiaoyan, XIE Chongchong |
166 | Microstructural Evolution and Properties Enhancement of SiC Refractory Castables Bonded with the Special CNFs/calcium Aluminate Cement | LEI Changkun, DING Donghai, XIAO Guoqing, HOU Xinmei, WANG Enhui |
167 | A New Ncc-Binder Concept: Easy-to-use, Easy-to-dry, High Refractoriness | Chunfeng LIU, Frederic LACOUE, Christoph WÖHRMEYER |
168 | How to Achieve Low Emission Carbon Bonded Monolithic Refractories | Jianying GAO, Christoph WÖHRMEYER, Magali SZEPIZDYN |
169 | Preparation and Characterization of Alumina-based Foam Ceramics with Low Thermal Conductivity | ZHOU Wenying, YE Guotian, ZHANG Zheng, ZHAO Degang |
170 | Progress and Green Development of Refractory Industry in Henan Province | JIN Qinguo, JIA Quanli, SHI Kai |
171 | Preparation of Alumina Silicate Nanofiber by Electrospinning and Its Properties | FENG Yonghang, WEN Jiajie, WEI Hengyong, CUI Yi, LYU Dongfeng, CHEN Yuejun, BU Jinglong, WEI Yingna |
172 | Effect of Andalusite Adding Amount on High Temperature Properties of Bauxite-based Low Creep High Alumina Bricks | LI Fuchao, YIN Kunbao, ZHANG Daoyun, ZHANG Yucai, YANG Yalin, CUI Yalei |
173 | Novel Preparation of SiO2/C Foams with Tailored Porosity by Emulsion Template Method and SiO2 Sol-Gel Technology | DONG Wenzhe, DONG Binbin, GUAN Li, FAN Lei, WANG Li, YIN Chaofan, WEI Jiawei |
174 | Application of Deep Neural Networks for Anomaly Detection and Prediction of Clogging Events in Continuous Casting Systems in Steelmaking | Amit Kumar GOPE, Alexandre BOULLE, Martiniano PICICCO, Felix BIRKELBACH, Severine Romero BAIVIER, Claire DWYER, Marc HUGER |
论文集（存储在U盘中）单本200元，不同会议的文集每多购一本增加100元，快递包邮。有需要的朋友可以直接联系：
发行部：赵老师
电话：0379-64205971
手机：18638350600（微信同号）
开户行：中原银行股份有限公司洛阳景华路支行
户 名：中钢集团洛阳耐火材料研究院有限公司
开户银行行号：313493000033
账 号：670410090000001128（请在用途栏注明“购买ISR2024论文集”）
